Servicemaxx Pro Downloadeverstore

Posted on 23-04-2021 by admin

Download Adobe Photoshop for Windows 10 PC/laptop. Download Adobe Photoshop CC 2020 21.1.0 (32-bit) (latest version) free for Windows 10 PC/laptop/tablet. Safe Download and Install from the official link! Adobe Photoshop download features: Adobe Photoshop. Download adobe photoshop.exe 32 bit for free. Photo & Graphics tools downloads - Adobe Photoshop CS 5 by Adobe Systems Incorporated and many more programs are available for. Find out which Adobe Photoshop features are unsupported on 32-bit platforms. Adobe photoshop 32 bit freebrownface.

ServiceMaxx version 43.26 (release date ) ServiceMaxx J1708. Connection / Communication: 9-Pin Type I (Black) Protocol CAN J1708 @ 250K Baud.
Dec 17, 2015 I have uploaded the most recent ServiceMaxx program contains The two separate ServiceMaxx programs 1939 and 1708 versions. Also inside the program is a registry crack file that gives you a lifetime version of ServiceMaxx. Simply install the registry file before you install the program. Works on XP and 7 not sure about 8 or 10.
Service Maxx 2890 Walker Rd. Windsor, Ontario N8W 3R1 519.966.9227.

Oct 24, 2018 (, 12:31 AM) blackdragon125 Wrote: I posted this a while back in the wrong section so I am reposting it again, this is the last version of servicemaxx with a permanent key that should last longer then your computer. Password is in the text document, enjoy.

ServiceMaxx 44.20 (Release date 07-28-2016)

Software Enhancements
- Snapshot recording
  - Playback window over-size corrected
- High Pressure Pump Test (Improvements to session: Entry Conditions and CPA information)
  - MaxxForce 11L, 13 (2010 – 2013)
  - N13 SCR (2013 – 2016-)
- I-6 Injector CEOM Reset (Improved user interface)
  - MaxxForce DT, 9, 10 (2010-2013)
  - N9, N10 (2014 – 2017)
- DOC Efficiency (Improved Configuration added 2 Parameters)
  - MaxxForce 11L, 13L (2010-2013)
Software Bugs
- Snapshot recording
  - Missing data in recording
  - Playback counter correction
Data-Base Updates (See SMXD for details)
- DTCs (Add, Rename, SPN-FMI Assignment)
- Signals (Add, Remove)
- Parameters (Add, Remove, Rename)
Engineering Access Only
- DDV Data Collection (For OBD Regulation)
  - All SCR Engines
- New Menu Item: Test Developments (Update on Tests and Procedures)
  - B786: N13 SCR (2017 -)
- MAF Calibration Procedure
  - B786: N13 SCR (2017 -)

International Servicemaxx Pro

ServiceMaxx version 43.1.1 (release date 02-06-2016)

Servicemaxx Pro Download

Engine Detection
- Additional support for J1939 500k baud rate and J1939 250k rate engine detection.

ServiceMaxx version 43.26 (release date 12-09-2015)

ServiceMaxx J1939

Connection / Communication:
- 9-Pin Type I (Black)
  - Protocol CAN J1939 @ 250K Baud
  - K-line (MWM Engines)
- 9-Pin Type II (Green)
  - Protocol CAN J1939 @ 250K Baud
  - Protocol CAN J1939 @ 500K Baud (2016 North American engines forward)
  - KWP2000 K-line (For MWM Engines)
Engine Detection Target:
- Engine Calibration ID (Production Calibration only)
- CAT Engines also use Parameter: 88/01
Supported Engines:
- North American
  - v155:MaxxForce 5 (2007 - 2009)
  - v134:MaxxForce 7 (2007 - 2009)
  - v152:MaxxForce 7 (2010 - 2012)
  - v179:MaxxForce 7 (2013 - )
  - i326:MaxxForce DT, 9, 10 (2007 - 2009)
  - i334:MaxxForce DT, 9 ,10 (2010 - 2012)
  - i367:MaxxForce DT, 9, 10 (2013)
  - i766:MaxxForce 11, 13 (2008 - 2009)
  - i783:MaxxForce 11, 13 (2010 - 2012)
  - B764:MaxxForce 11, 13 (2013 - 2013.5)
  - i770:MaxxForce 15 (2010 - 2013)
- SCR Engines
  - I746:N9, N10 SCR (2014 - )
  - B718:N13 SCR (2013 - 2014)
  - B745:N13 SCR (2015 - )
- Removed Engines:
  - I63BX:3 Box I6 (1994 – 1997)
  - V83BX:3 Box V8 (1994 – 1997)
  - I308:DLC I6 (1998 – 2004)
  - T444E:DLC V8 (1998 – 2004)
  - V126:DLCII V6 (2005 – 2006)
  - I313:DLCII I6 (2005 – 2006)
  - V128:DLC V8 (2005 – 2006)
Engine list below is with Engineering Access:
- Military Engines
  - Mil13:MaxxForce 12.4D
- CAT Engines:
  - CT11:CAT CT11/13 (2010 - 2012)
  - CT764:CAT CT13 (2013)
  - CT15:CAT CT15
  - CT718:CAT CT13 SCR (2013 - 2014)
  - CT745:CAT CT13 SCR (2015 - )
- Global Engines:
  - I341:DLCII I6 Export (2007 - )
  - I716:N13 (Euro V)
  - MWM:MaxxForce 3.0H (Euro III - P418V50)
  - MWM:MaxxForce 7.2/4.8 H (Euro III - P625V13)
  - MWM:MaxxForce 7.2/4.8 H (Euro IV - P800V24)
  - MWM:MaxxForce 7.2/4.8 H (Euro IV - P800V32)
  - MWM:MaxxForce 7.2/4.8 H (Euro V - P1090V52)
  - MWM:MaxxForce 3.2 H (Euro III)
  - MWM:MaxxForce 3.2 H (Euro IV)
  - MWM:MaxxForce 3.2 H (Euro V)
- Engineering Engines:
  - B786N13 (2017 - )
- Removed Engines (Did not go into Production):
  - I355:MaxxForce 9.3 (Euro V)

Servicemaxx Download Software

Software Fixes:

Pokemon Revolution Online Download

Software Lag or Slow response Issue
- Change the way Requested signals are handled.
ServiceMaxx version 42.18 (release date: 08/05/2015)
- Software Enhancements
  - MaxxForce 11/13 (2010 - 2013)
    - DOC Efficiency Test (Field Service Access)
  - MaxxForce DT/9/10 (2010 - 2013)
    - DOC Efficiency Test (Engineering Development)
    - Air Management Performance Test (Engineering Development)
    - Trip Report
    - Remove Trip Report (Not Supported)
  - MaxxForce 11/13 (2010-13), N13 SCR (2014 - 2015)
    - Stand Alone Real Time Clock
    - Time Synchronization Check
    - Multi Cylinder Cutout enhancements
    - Add Start and End temperatures to Test Results
    - Trip Report enhancement
    - Remove MaxxForce name from Report Printout
    - Correct Reset for Trip Active Regen Count
  - N9/N10 SCR (2014 - ), N13 SCR (2013 - 2015)
    - DPF Regeneration session
      - Session update (Move Test Inhibitors to Default view)
  - N13 SCR (2017) Engineering Access only
    - Add database Support: Signals/Parameters/DTCs
  - Snapshot recordings enhancement
    - Remove Min/Max/Average from recordings
    - Remove Negative counter
  - History Support (Phase 1)
    - Writes Engine information to history.
    - Vehicle Identification number
    - Engine Serial Number
    - Calibration ID
    - Customer Password â€“ When entered by user.
  - Slow Network Alert
    - Popup Alert message if slow Network is detected during software updates.
- Software Fixes
  - Signal display and Recording
    - Display Proper Symbols
    - Display correct value in Graphs
  - MaxxForce 11/13 (2010 - 2013), N13 SCR (2014 - 2015)
    - Multi Cylinder Cutout enhancements
    - Refresh Test Results panel if test is re-started.
    - Test Abort Message Correction
    - High Pressure Pump Test
    - Air Management Test
    - Intake Air Heater Test
ServiceMaxx version 41.3.4 (release date: 04/20/2015)
- Software Enhancements
  - Dealer Export All Parameters
    - U.S. and Canada Engine Models
ServiceMaxx version 41.1.148 (release date: 03/06/2015)
- Software Fixes
  - N9/N10 7 (2010 - 2012)
    - Freeze Frame
  - Pre MaxxForce Engines
    - Remove Freeze Frame from engines that do not support Freeze Frame.
  - SCR Engines
    - Parameter and Address change
      - ECM 83,69: ACM: 26318
      - ECM 83,70: ACM: 26311
      - ECM 83,73: ACM: 26317
  - Software expiration message fixed.
- Software Enhancements
  - Remove Cylinder Cutout Test.
    - N13 SCR (2013 - 2014)
    - N13 SCR (2015 - )
    - MaxxForce 11/13 (2010 - 2012)
    - MaxxForce 15 (2011 - 2012)
    - MaxxForce 13 (2013 -)
    - CT13 SCR (2015 - )
    - CT15 (2011 - 2012)
    - CT11/13 (2010 - 2012)
  - Added Cylinder Performance Analyzer to the following engines.
    - MaxxForce 5 (2007 - 2009)
    - MaxxForce 7 (2007 - 2009)
    - MaxxForce 7 (2010 - 2012)
    - MaxxForce 7 (2013 - )
    - MaxxForce 11/13 (2010 - 2012)
    - MaxxForce 13 (2013)
    - MaxxForce 15 (2011 - 2012)
    - N13 SCR (2013 - 2014)
    - N9/N10 SCR (2014 - )
    - N13 SCR (2015 - )
  - Improved Translation
    - Spanish
    - French
ServiceMaxx version 41.129 (release date: 01/12/2015)
- Software Enhancements
  - New Engine Support
    - 2015 N13 SCR and 2015 CT13 SCR
  - Java 7 Support
  - Increase Snapshot Data Storage Size
  - Improved Test Instructions with entry conditions
  - Performance Improvements:
    - Freeze Frame at users request
    - Clear & Refresh DTC at request
  - Improved Test Instructions with entry conditions
  - Added Required Parameters
  - CAT Engine Test and Procedures
    - O2 Sensor Calibration
    - DOC/DPF Replacement Reset
    - KOER Cylinder Balance Test
    - SCR Fault Reset Request
- Software fixes
  - Snapshot Signal Drop Off bug fix
  - DLCII I6
  - DLCII I6 (2004 - 2006)
    - Injector Disable revert to normal fix
  - Trip Report bug fix
  - Incorrect Trip & Total DEF Fuel Used fix
  - Trigger Setup Bug
  - Run as Non-Admin
  - N13 Fatal System Error
  - Two or more RP1210 required interface fix
  - Cylinder Cut Out bug fix
  - Signal and DTC clean-up (Add/ Remove/ Rename)
ServiceMaxx version 40.1.119 (release date: 08/28/2014)
- Software Fixes
  - MaxxForce 11/13 (2010 - 2012) & MaxxForce 13 ( 2013 - )
    - EDR (Event Data Record)
  - MaxxForce 7 (2013)
    - Auto Engine Probing
  - Korean Pro Star
    - Support M13 Euro V
- Software Enhancements
  - New Engine Support
    - N9/N10 SCR ( 2014 - )
  - MaxxForce 11/ 13 ( 2010 - 2012) & MaxxForce 13 ( 2013 - )
    - Actuator Test Signals 3479-0 & 3482-0
  - Relative Compression
    - Instructions Changed (ignore faults set during test) .
ServiceMaxx version 40.112 (release date: 07/23/2014)
- NOTE: ServiceMaxx Pro will only include U.S. and Canada engine models.
- Software Enhancements
  - Application Launch
    - Improved Launch of ServiceMaxx
  - Supports U.S. and Canada engine models
    - v40.112 and future releases will ONLY include U.S. and Canada engine models
  - New Engine Support
    - N9/N10 SCR ( 2014 - )
  - N9/ N10 SCR ( 2014 - )
    - Key On Engine Off; Close End Of Motion (CEOM) Reset Procedure. Injector Parameter Reset, after injector replacement
    - SCR Maintenance Reset
    - Fuel Pressure Adaptation Rese
  - N13 SCR ( 2013 - )
    - Cylinder Balance Session
    - SCR Maintenance Reset
  - MaxxForce 11/ 13 ( 2010 - 2012) & MaxxForce 13 ( 2013 - )
    - Cylinder Balance Session
  - MaxxForce DT/ 9/ 10 (2010 - 2012) & ( 2013 - )
    - Fuel Pressure Adaptation Reset
- Software fixes
  - Snapshots
    - Support larger Snapshot file playback
ServiceMaxx version 39.84 (release date: 05/27/2014)
- Software fixes
  - Engine Auto Detect
    - MaxxForce 7 (2013 - )
  - Total Trip Report
    - MaxxForce 11/13/15 (2010 - )
ServiceMaxx version 39.82 (release date: 05/13/2014)
- Software fixes
  - Auto populate vehicle information in CPA (Cylinder Performance Analyzer)
    - MaxxForce DT/9/10 (2007 - )
ServiceMaxx version 39.80 (release date: 05/2/2014)
- Software fixes
  - KOEO and KOER
    - Tests for on engines with protocol 1708 (1998 - 2006)
ServiceMaxx version 39.79 (release date: 05/1/2014)
- Software Enhancements
  - MaxxForce DT/9/10 (2010 - 2012 & 2013 - )
    - Key On Engine Off; Close End Of Motion (CEOM) Reset Procedure. Injector Parameter Reset, after injector replacement.
    - Fuel Presure Adaptation Reset Procedure
  - New Engine Support
    - N13 Euro V
- Software fixes
  - Engine Auto Detect
    - MaxxForce 3.2 (2010 - 2012 & 2013 - )
    - MaxxForce 11/13 (2007 - 2009)
ServiceMaxx version 38.1.21 (release date: 02/31/2014)
- Software Enhancements
  - MaxxForce 11/13 (2010-2012)
    - O2 Session
  - CPA Tool launch from ServiceMaxx
  - New Engine Selection Menu
- Software fixes
  - MaxxForce 3.2 (Euro V)
    - DTC Fault Status
  - Engine Probe for N13
ServiceMaxx version 38.0.25
- Software Updates
  - MaxxForce 3.2 (Euro V) Support
    - Freeze-frame
    - Signal & Parameter Updates
    - Associated SPN/FMI to DTC’s.
  - New Default Session
  - Sessions are update to support 2013 MaxxForce DT910 for dealers.
  - Grayed out Procedures menu for engines that do not support procedures.
- Software fixes
  - MaxxForce 7.2/4.8 Parameter Programming Fix
ServiceMaxx version 37.51
- Software Updates
  - Java Web Start Replacement (WSR) version of ServiceMaxx
    - Click here for details https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID=8053&SEQLanguage=1001
  - New signal for 2013 MaxxForce DT/9/10. 'Exhaust Back Pressure: Expanded' with range of -29 to 118 PSI
- Software fixes
  - Korean translation bug fix
ServiceMaxx version 37.37
- Software Updates
  - Sessions dropdown is unique for the connected engine
  - 2013 MaxxForce 13L and 2013 N13 DTC timestamp is available in freeze frame data.
  - Certain engineering level parameter accumulators can now be applied to templates.
  - OBD engines only have one active DTC count signal.
  - Activity report precision is updated and consistent with trip and total data.
  - Cylinder Performance Analyzer can be launched with 2013 MaxxForce DT/9/10L
  - 2010 MaxxForce 11/13L and 2013 MaxxForce 13L templates can now be used interchangeably.
  - SART panel now has a scroll bar.
- Software fixes
  - Activity report trip regen count accumulates properly.
  - 2013 MaxxForce DT/9/10L fault clearing no longer has a delay.
  - Active DTC count trigger for Pre-MaxxForce engines now works properly.
  - Snapshot illegal thread state exception is now fixed.
ServiceMaxx version 36.2.50
- Software Updates
  - Export Parameters report (.csv) works properly for Pre-3.9 calibrations on MaxxForce 11/13/15L engines.
  - Snapshot fixes:
    - Signals are ordered properly in the SLK file
    - Intermittent issue where rows of data are missing in the snapshot SLK file is fixed
    - SCR Signals display twice is fixed
    - Intermittent issue with signal errors while opening spreadsheet is fixed
- Known issues to be addressed in future ServiceMaxx version
  - DTC Clearing has a delay with 2013 MaxxForce DT/9/10.
  - ACM Parameters are not supported in Templates at this time. (Engineering Only)
ServiceMaxx version 36.40
- Software Updates
  - Support for 2013 N13 SCR
    - Freeze Frame Data
    - OBD Monitor Readiness and Test Results
    - Trip Report
    - New Service Bay Tests
      - KOEO Aftertreatment Test:
        Actuator - AFT Air Shutoff Valve
        Actuator - AFT Fuel Shutoff Valve
        Actuator - AFT Fuel Injector
        Actuator - DEF Reverting Valve
        Actuator - DEF Line Heater
        Actuator - DEF Tank Heater
        DEF Doser Pump Override
        DEF System Leak Test
      - KOER Aftertreatment Test:
        AFT Shutoff Valve and Injector Test
      - KOER Aftertreatment Procedure:
        DPF Filter Regeneration
  - Fault Clearing for PRV on MaxxForce 4.8/7.2 Euro IV
- Known issues to be addressed in future ServiceMaxx version
  - Export Parameters report (CSV) is not working properly for Pre 3.9 calibrations on MaxxForce 11/13/15L engines.
  - Snapshot issues:
    - Signals are not ordered properly in the SLK file
    - Intermittent issue where rows of data are missing in the snapshot SLK file
    - SCR Signals display twice
    - Intermittent issue with signal errors while opening spreadsheet
  - DTC Clearing has a delay with 2013 MaxxForce DT/9/10.
  - ACM Parameters are not supported in Templates at this time. (Engineering Only)
  - Known N13 calibration issues (B160DO04) that impact ServiceMaxx
    - Air Management Test for 2013 N13 is disabled
    - Engine Fan Test for 2013 N13 is disabled
ServiceMaxx version 35.30
- Software Updates
  - Support for 2013 MaxxForce DT/9/10 OBD
    - Freeze Frame Data
    - OBD Monitor Readiness and Test Results
  - Snapshot Trigger Setup Enhancements
    - Unit column added
    - Trigger Setup window size has been optimized
    - Non-numerical trigger criteria is fixed
    - Record Pre-Trigger time is fixed
    - Saving the trigger criteria is more robust
- Software Fixes
  - All 3 Box (1994-1997) parameters and signals load
  - 3 Box (1994-1997) proprietary password programming is fixed (Engineering Only)
- Known issues to be addressed in future ServiceMaxx version
  - Intermittent 'Heartbeat timeout' error when running service bay test. Note: You can normally run the test successfully after getting this error.
ServiceMaxx version 34.34
- Software Updates
  - Support for 2013 MaxxForce 7 OBD
    - Freeze Frame Data
    - OBD Monitor Readiness and Test Results
  - Improved parameter downloading for reports. Status bar has been updated.
  - Added Software ID and ServiceMaxx version to the Export Parameter report.
- Software Fixes
  - ServiceMaxx Template now closes upon cancelling the Open Template window
  - Fixed Template bug that changes the Engine Type associated with a template
  - MaxxForce 7.2/4.8 bug is fixed when selecting two signals to watch in a graph
- Known issues to be addressed in future ServiceMaxx version
  - Intermittent 'Heartbeat timeout' error when running service bay test. Note: You can normally run the test successfully after getting this error.
ServiceMaxx version 33.27
- Software Updates
  - Support for 2013 MaxxForce 13 OBD
- Software Fixes
  - Loading a template not connected to an engine is fixed
  - 2008 - 2009 MaxxForce 11/13 Vehicle Report can be printed
  - Freeze Frame data with French translation is fixed
  - Cylinder Cutout Test with French translation is fixed
  - Parameter 79390 (Driver reward ambient temperature limit low) is fixed
  - 2010 MaxxForce 11/13 ECM communication issue during service bay test is now fixed
  - Engine detection fix for 2013 MaxxForce 13 – 450HP (1550/1700 FT-LBS) and 500HP (1700 FT-LBS) calibrations only
- Known issues to be addressed in future ServiceMaxx version
  - Intermittent 'Heartbeat timeout' error when running service bay test. Note: You can normally run the test successfully after getting this error.
ServiceMaxx version 32.88
- Software Updates
  - Multi Cylinder Cutout tests (manual and automated) are now available for 2010 MaxxForce 11/13/15L.
  - Removed 'Select Engine' from File menu for dealers.
  - Customer Password enhancements - Customer password is required to be entered twice and is now limited to eight characters.
  - Added new SCR engines to 'Select Engine' menu (MaxxForce 11/13L & DT 9/10L) - Engineering ONLY.
  - Removed Fuel Pump Priming Procedure from MaxxForce 7L.
  - Cylinder Cutout test printed report has been modified to be more user friendly.
  - New sessions - Default and after treatment sessions now contain all signals.
  - Torque/RPM report has been removed until it is compatible with 3.11 software (MaxxForce 11/13/15L).
  - DOC Cleaning Procedure can now be ran without requiring Customer Password.
  - Driver reward PP's are displayed in tenths of gallons.
- Software Fixes
  - EDR (Event Data Recorder) now displays the correct timestamps for incomplete data.
  - Freeze Frame Timestamp is now correct (2010 MaxxForce 11/13/15L).
  - Cylinder Cutout test messages are now working properly (2010 MaxxForce 7).
  - Programmable Parameters rounding issue has been resolved.
  - Engine load value in EDR report is now displaying correctly.
  - Intermittent Snapshot errors have been resolved.
  - French Language Registration window is now displaying correctly.
  - ServiceMaxx expiration notice window now displays the proper date.
  - Export Parameters report on MaxxForce 11/13/15L with pre 3.9 calibration works properly.
- Known issues to be addressed in future ServiceMaxx version
  - Print Vehicle report does not work for 2008-2009 MaxxForce 11/13
  - Template error when loading a template while not connected to a vehicle
ServiceMaxx version 31.55
- Updates
  - Ability to read & program 16-digit IQA codes for 2010 MaxxForce 11/13/15 (Engineering only)
  - Vehicle report can now be saved as an SLK file for all engines
  - Activity Report can now be saved as an SLK file for 2010 MaxxForce 11/13/15
  - Event data recorder SLK report now includes the ability to graph data for 2010 MaxxForce 11/13/15
  - New KOER Actuator Test for 2010 MaxxForce 11/13/15 (Engineering only)
  - Enhanced Snapshot and Trigger Setup wording
  - Added the ability to have multiple brands of ServiceMaxx running on the same PC
  - Enhanced test and procedure verbiage - More user-friendly
  - DSI System De-Aeration can only be run twice in the same session for 2010 MaxxForce DT/9/10
  - Vehicle Trip Report session instructions have been updated
  - New OBD in-use monitor performance ratio (IUMPR) report available. Located in OBD session
  - CAT CT 11/13/15 can now be detected and will be directed to use CAT Engine Diagnostics (Engineering can use SMX for CT engines)
  - Automated and manual multi-cylinder cutout test available for 2010 MaxxForce 11/13/15 (Engineering only)
  - Snapshots SLK file now have standard formatting for easier graphing and macro usage
  - System Operation Monitor (Engine Abuse) report now available for 2010 MaxxForce 11/13/15. Located in Trip Report session
- Global ServiceMaxx
  - NP600 support (3.2L Euro V)
  - Minor corrections for P1090 support (MaxxForce 7.2/4.8 Euro V)
  - P800 data correction (MaxxForce 7.2/4.8 Euro IV)
  - P625 fault-clearing bug fix (MaxxForce 7.2/4.8 Euro III)
  - Adding ISO15765 protocol support
- Production Bug Fixes
  - Session instructions now open at the top of the panel
  - Ability to start any 'branded' version of ServiceMaxx before it is registered such as CAT Engine Diagnostics
  - Activity Report shows correct Metric values
  - Heartbeat error has been resolved
  - MaxxForce DT/9/10 Fuel Doser actuator test is now commanded to the proper percentage
  - Parameter Programming is fixed on development modules (Engineering only)
  - SPN 558 (Idle Validation Switch) is now displayed properly in Freeze Frame data for MaxxForce 11/13/15
  - ServiceMaxx Pro rollover to ServiceMaxx Lite no longer requires administrative privileges
  - Customer Password intermittent issues are resolved
- Known issues to be addressed in future ServiceMaxx version
  - 2010 MaxxForce 7 Cylinder Cutout Test does not work properly if used prior to using the KOER Standard Test
  - Intermittant Snapshot Error
  - Some parameters can't be programmed to the desired value
    - Example: PP 79192 (Driver Reward: Fuel Economy Excellent Level). Requested value 6.92 mpg, ServiceMaxx rounds it to 6.89 mpg
ServiceMaxx version 30.532
- Updates
  - Active DTC's are displayed in snapshots
  - AFT Fuel Rate signal is fixed for 2010 MaxxForce DT/9/10
  - Non-warranty, audible only Injector Disable/Cylinder Cutout Test is added back for 2004-2006 DT466/570 & 2007-2010 MaxxForce DT/9/10
  - Relative Compression Test results are ordered correctly for 2010 MaxxForce 11/13
  - Session drop down menu displays correctly for non-engineers
  - HD-OBD Readiness Report Monitors are corrected
  - Clutch Switch signal is added for MaxxForce15
ServiceMaxx version 30.521
- Updates
  - Reset Trip Report has been enhanced to be more reliable
  - The last trip reset date is now programmed into parameter ID 66092 for 2010 MaxxForce 11/13/15
  - Trip Regen Fuel Used can now be reset on 2010 MaxxForce 11/13/15
  - Registration window content has been updated
  - Cylinder Performance Analyzer can be launched from ServiceMaxx under the Tests menu
  - The registration expiration date can be seen by clicking OK in the Registration window
  - 2010 MaxxForce 11/13, running the Relative Compression Test or High Pressure Pump Test, the Save & Print have been fixed. The Refresh button has been removed
  - Templates have been upgraded to be able to search by Parameter ID
  - Template issues have been resolved
  - Intermittant Snapshot issues have been resolved
  - NEXIQ USB-Link can be used with ServiceMaxx and MWM engines over the KWP2000 protocol
  - French Canadian registration issues have been resolved
  - Injector Disable Test has been removed from 2004-2006 DT466/570 & 2007-2010 MaxxForce DT/9/10 engines. See IK1200750 for details
  - Freeze Frame data is now available for 2010 MaxxForce DT/9/10 engines
  - CAT CT15 engine is now supported
- Known issues to be addressed in future ServiceMaxx version
  - 2010 MaxxForce 7 Cylinder Cutout Test does not work properly if used prior to using the KOER Standard Test
ServiceMaxx version 29.485
- Updates
  - New DSI System Test for 2010 MaxxForce DT/9/10
  - New DSI System De-Aeration Procedure for 2010 DT/9/10
  - New Coolant Control Valve Test for 2010 MaxxForce 11/13/15
  - New Fuel Pressure Adaptation Reset Procedure for 2010 MaxxForce 7
  - Updated Relative Compression Test Session
  - Fixed Engine Overspeed Count display issue in the MaxxForce Activity Report
- Known issues to be addressed in future ServiceMaxx version
  - 2010 MaxxForce 11/13, running the Relative Compression Test or High Pressure Pump Test, the Save, Print & Refresh buttons do not display the first time. The buttons will display after running the test a second time.
  - There is an issue with creating a template not connected to a vehicle. After you save a template, close and reopen a template twice, the template can be corrupted.
  - Intermittant snapshot recording issue where the file is not saved correctly. Restarting ServiceMaxx typically resolves this issue
ServiceMaxx version 29.470
- Updates
  - Event Data Recorder (EDR) added for 2010 MaxxForce 11/13/15. See IK1200654
  - New Toolbar icons
  - ServiceMaxx Print Vehicle Report has been updated
  - Freeze Frame has been updated and includes slk and printed reports
  - Trip Data & Total Data slk reports have been updated
  - Vehicle Events now have the event thresholds listed next to the event name
  - Parameter 76024 (Cruise Control Ramp Rate) is now displayed in the parameter session for 2008-2009 MaxxForce 11/13
  - 1708 signal SPN 113500 (VGT Duty Cycle Offset) displaying incorrectly has been resolved
- Known issues to be addressed in future ServiceMaxx version
  - 2010 MaxxForce 11/13, running the Relative Compression Test or High Pressure Pump Test, the Save, Print & Refresh buttons do not display the first time. The buttons will display after running the test a second time.
  - There is an issue with creating a template not connected to a vehicle. After you save a template, close and reopen a template twice, the template can be corrupted.
  - Intermittant snapshot recording issue where the file is not saved correctly. Restarting ServiceMaxx typically resolves this issue
ServiceMaxx version 422
- Updates
  - ServiceMaxx Lite now available after registration period has expired. See IK2600146
  - Snapshot files (.slk) are automatically compressed for e-mailing and uploading
  - Templates work with MaxxForce 15
  - Auto connecting to engine issues have been resolved
  - ServiceMaxx registration issues have been resolved
  - Vehicle Events & the Activity Report have been disabled for 2008-2009 MaxxForce 11/13
  - Spanish and Portuguese translations
  - MWM updates have been added
- Known issues to be addressed in future ServiceMaxx version
  - 2010 MaxxForce 11/13, running the Relative Compression Test or High Pressure Pump Test, the Save, Print & Refresh buttons do not display the first time. The buttons will display after running the test a second time.
  - The DTC state (Active, Inactive, etc.) may display differently in the Print->Vehicle report than what ServiceMaxx displays on older 1708 engines.
ServiceMaxx version 388
- Updates
  - Parameter Template feature has been added. See IK1200603
  - Trip Reporting has been updated. Click Sessions->Vehicle Trip Report
  - ServiceMaxx will now auto connect to the vehicle without needing to select the COM link (1708 or 1939)
  - ServiceMaxx will now auto connect with the engine running
  - Added language translations for Portugeuse and Spanish
  - Fix for the Java error when running the Relative Compression Test Repeatedly
  - 2010 MaxxForce 11/13 displays results in cylinder order (was firing order)
  - Exhaust Back Pressure Control Valve no longer displays in the 15L KOEO Actuator Test
  - DPF Service & IQA sessions respond quickly after programming parameters in these sessions
  - Snapshot playback works properly on computers that are set to languages other than English (see IK2600125)
  - SART (Stand Alone Real Time) module displays the timestamp correctly in freeze frame data
- Known issues to be addressed in future ServiceMaxx version
  - 2010 MaxxForce 11/13, running the Relative Compression Test or High Pressure Pump Test, the Save, Print & Refresh buttons do not display the first time. The buttons will display after running the test a second time.
  - The DTC state (Active, Previously Active, etc.) may display differently in the Print->Vehicle report than what ServiceMaxx displays.
  - 2008-2009 MaxxForce 11/13 Vehicle Event (VETS) logging does not work properly

Coments are closed

Folioblog272

Servicemaxx Pro Downloadeverstore

International Servicemaxx Pro

Servicemaxx Pro Download

Servicemaxx Download Software

Pokemon Revolution Online Download

MOST POPULAR ARTICLES